The Extreme Tools® hydraulic hammer bits are designed to meet every need, perfectly fitting all types of breakers available on the market. Production is entirely carried out in Italy, ensuring a 100% Italian high-quality product.
Every phase of the manufacturing process, from machining to heat treatment, from painting to testing, is performed with care and attention to provide highly performing chisels. Thanks to the selection of special steels and advanced heat treatments, the bits ensure a perfect balance between wear resistance and toughness, guaranteeing durability and excellent performance even in the most extreme working conditions.
Choose Extreme Tools® hydraulic hammer chisels for a reliable and durable product, designed to last over time.
- Do not give blank firing
- Do not use the tool as leverage to move boulders
- Do not beat the tools in the same place for too much time
- Always work perpendicular to the ground
- Lubricate the tool regularly
TYPE OF STEEL
Our tools use a hardening steel with a nickel component that increases the thermal conductivity during the treatment, allowing to have a homogeneous hardness between the external surface and the heart of the tool.
ULTRASOUND CHECK
At the time of purchase, the steel undergoes an initial ultrasound check to look for any internal anomalies. Surface imperfections are eliminated during the processing phase. In this stage, 6 mm up to 10 mm of material are removed depending on the diameters.
DIMENSION CHECK
After processing, a dimension check is carried out just before the heat treatment.
HARDNESS CHECK
The production cycle ends with the hardness check. Hardness must remain in a range between 48 HRC and 50 HRC (higher values increase the fragility of the tool and the chance of break and failure). The hardness check is carried out on every single tool we produce, with a single impression for lengths up to 800mm; and with two or three impressions for longer lengths.
Standard hydraulic hammer bits
In order to avoid breakages and unexpected maintenance during demolition work, the choice of tool is very important and should be made mainly according to: type of excavator, type of hydraulic breaker, type of soil. With EXTREME® Tools we can offer cutting tools for any type of application and ground conditions.
CONE TIP
Model: P series
Type of usage: Recommended for operations on homogeneous rock or concrete. Its force is heavily concentrated.
FLAT TIP
Model: D series
Type of usage: Recommended for breaking erratic rocks or rocky aggregates.
MOIL TIP
Model: E series
Type of usage: Recommended for operations on hard homogeneous rocks. The pyramid surfaces channel the dust out of the working area.
CHISEL TIP
Model: T series (vertical) – S series (horizontal)
Type of usage: Recommended for operations on miscellaneous material. A sharp cutting action helps to define the shape of demolition.
WIDE CHISEL TIP
Model: B series (vertical tip) – C series (horizontal tip)
Type of usage: Recommended for cutting with great precision plastic material, like asphalt or frozen ground.
Special hydraulic hammer bits
We supply special demolition tools for hydraulic hammers, the best choice when breaking material that forms a lot of dust during the job. These special tools are milling-machined, and they channel the dust out of the working area. This way, every hit is effective, and there is no overheating caused by extended usage.
MILLED CONE TIP
Type of usage: Recommended for operations on homogeneous rock or concrete. It allows to concentrate the force of the hit in one single point.
MILLED CHISEL TIP
Type of usage: Recommended for operations on miscellaneous material. A sharp cutting action helps to define the shape of demolition.
RAMMING TIP
Model: BP series
Type of usage: Ramming tool is used to beat poles made of wood or concrete. Its shape is based on the diameter of the pole to hammer.
For more information or technical details of cutting tools for hydraulic hammers EXTREME TOOLS®, contact us or download our PDF catalog!
